Каталог Iscar сверла со сменной режущей частью 2022 - страница 13

INDEXABLE DRILLS DCN R-8D OALLPR LS Exchangeable Head Drills with LU Coolant Holes and a Cylindrical DCN-DCX k7 DCONMSh6 DF Shank, Drilling Depth 8xD PL Designation DCN(1) DCX(2) DCONMS DF LU LPR PL LS OAL SSC(3) MIID(4) DCN 060-048-12R-8D 6.00 6.40 12.00 16.00 48.96 62.0 0.960 45.0 107.00 6.0 ICP 060 K DCN 6-9.99-Y DCN 065-052-12R-8D 6.50 6.90 12.00 16.00 53.18 66.3 1.180 45.0 111.30 6.5 ICP 065 K DCN 6-9.99-Y DCN 070-056-12R-8D 7.00 7.40 12.00 16.00 57.01 70.6 1.010 45.0 115.60 7.0 ICP 070 K DCN 6-9.99 DCN 075-060-12R-8D 7.50 7.90 12.00 16.00 61.10 74.6 1.100 45.0 120.00 7.0 ICP 075 K DCN 6-9.99 DCN 080-064-12R-8D 8.00 8.40 12.00 16.00 65.20 79.4 1.200 45.0 124.40 8.0 ICP 080 K DCN 6-9.99 DCN 085-068-12R-8D 8.50 8.90 12.00 16.00 69.29 83.4 1.290 45.0 128.40 8.0 ICP 085 K DCN 6-9.99 DCN 090-072-12R-8D 9.00 9.40 12.00 16.00 73.35 87.8 1.350 45.0 132.80 9.0 ICP 090 K DCN 6-9.99 DCN 095-076-12R-8D 9.50 9.90 12.00 16.00 77.44 91.8 1.440 45.0 136.80 9.0 ICP 095 K DCN 6-9.99 DCN 100-080-16R-8D 10.00 10.40 16.00 20.00 81.50 96.2 1.500 48.0 144.20 10.0 ICP 100 K DCN 10-13.99 DCN 105-084-16R-8D 10.50 10.90 16.00 20.00 85.59 100.2 1.590 48.0 148.20 10.0 ICP 105 K DCN 10-13.99 DCN 110-088-16R-8D 11.00 11.40 16.00 20.00 89.67 104.6 1.670 48.0 152.60 11.0 ICP 110 K DCN 10-13.99 DCN 115-092-16R-8D 11.50 11.90 16.00 20.00 93.76 108.6 1.760 48.0 156.60 11.0 ICP 115 K DCN 10-13.99 DCN 120-096-16R-8D 12.00 12.40 16.00 20.00 97.82 113.0 1.820 48.0 161.00 12.0 ICP 120 K DCN 10-13.99 DCN 125-100-16R-8D 12.50 12.90 16.00 20.00 101.91 117.0 1.910 48.0 165.00 12.0 ICP 125 K DCN 10-13.99 DCN 130-104-16R-8D 13.00 13.40 16.00 20.00 105.96 121.6 1.960 48.0 169.60 13.0 ICP 130 K DCN 10-13.99 DCN 135-108-16R-8D 13.50 13.90 16.00 20.00 110.05 125.6 2.050 48.0 173.60 13.0 ICP 135 K DCN 10-13.99 DCN 140-112-16R-8D 14.00 14.40 16.00 20.00 114.12 132.1 2.120 48.0 180.10 14.0 ICP 140 K DCN 14-17.99 DCN 145-116-16R-8D 14.50 14.90 16.00 20.00 118.21 136.2 2.210 48.0 184.20 14.0 ICP 145 K DCN 14-17.99 DCN 150-120-20R-8D 15.00 15.90 20.00 25.00 122.27 143.7 2.270 50.0 193.70 15.0 ICP 150 K DCN 14-17.99 DCN 160-128-20R-8D 16.00 16.90 20.00 25.00 130.42 153.3 2.420 50.0 203.30 16.0 ICP 160 K DCN 14-17.99 DCN 170-136-20R-8D 17.00 17.90 20.00 25.00 138.59 162.9 2.590 50.0 212.90 17.0 ICP 170 K DCN 14-17.99 DCN 180-144-25R-8D 18.00 18.90 25.00 32.00 146.73 172.5 2.730 56.0 228.50 18.0 ICP 180 K DCN 18-21.99 DCN 190-152-25R-8D 19.00 19.90 25.00 32.00 154.88 182.0 2.880 56.0 238.00 19.0 ICP 190 K DCN 18-21.99 DCN 200-160-25R-8D 20.00 20.90 25.00 32.00 163.02 191.6 3.020 56.0 247.60 20.0 ICP 200 K DCN 18-21.99 DCN 210-168-25R-8D 21.00 21.90 25.00 32.00 171.18 201.2 3.180 56.0 257.20 21.0 ICP 210 K DCN 18-21.99 DCN 220-176-25R-8D 22.00 22.90 25.00 32.00 179.32 210.8 3.320 56.0 266.80 22.0 ICP 220 K DCN 22-26.99 DCN 230-184-32R-8D 23.00 23.90 32.00 42.00 187.46 220.4 3.460 60.0 280.40 23.0 ICP 230 K DCN 22-26.99 DCN 240-192-32R-8D 24.00 24.90 32.00 42.00 195.62 230.0 3.620 60.0 290.00 24.0 ICP 240 K DCN 22-26.99 DCN 250-200-32R-8D 25.00 25.90 32.00 42.00 203.80 239.5 3.800 60.0 299.50 25.0 ICP 250 K DCN 22-26.99 DCN 260-208-32R-8D 26.00 26.90 32.00 42.00 211.95 249.3 3.950 60.0 309.30 26.0 ICP 260 K DCN 22-26.99 DCN 270-216-32R-8D 27.00 27.90 32.00 42.00 220.10 258.6 4.100 60.0 318.60 27.0 ICP 270 K DCN 27-32.99 DCN 280-224-32R-8D 28.00 28.90 32.00 42.00 228.25 268.2 4.250 60.0 328.20 28.0 ICP 280 K DCN 27-32.99 DCN 290-232-32R-8D 29.00 29.90 32.00 42.00 236.43 277.8 4.430 60.0 337.80 29.0 ICP 290 K DCN 27-32.99 DCN 300-240-32R-8D 30.00 30.90 32.00 42.00 244.59 287.4 4.590 60.0 347.40 30.0 ICP 300 K DCN 27-32.99 DCN 310-248-32R-8D 31.00 31.90 32.00 42.00 252.76 297.0 4.760 60.0 357.00 31.0 ICP 310 K DCN 27-32.99 DCN 320-256-32R-8D 32.00 32.90 32.00 42.00 260.86 306.5 4.860 60.0 366.50 32.0 ICP 320 K DCN 27-32.99 • Prior to using the 8xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill. It is not required if HCP or QCP drilling head is used • Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81 (1) Cutting diameter minimum (2) Cutting diameter maximum (3) Seat size code (4) Master insert identification For inserts, see pages: ICP (18) • ICP-2M (24) • ICK (28) • ICK-2M (32) • ICM (36) • ICN (42) • QCP-2M (43) • HCP-IQ (47) • FCP (52) • ICG (57) DCN R-10D OAL Exchangeable Head Drills with LPR Coolant Holes and a Cylindrical Shank, Drilling Depth 10xD DC k7 DCONMS h6 DF PL LU Designation DC DCONMS DF LU LPR PL OAL SSC(1) DCN 160-160-20R-10D 16.00 20.00 25.00 162.40 185.30 2.420 235.30 16.0 K DCN 14-17.99 DCN 190-190-25R-10D 19.00 25.00 32.00 192.90 220.00 2.880 276.00 19.0 K DCN 18-21.99 DCN 250-250-32R-10D 25.00 32.00 42.00 253.80 289.50 3.800 349.50 25.0 K DCN 22-26.99 • Prior to using the 10xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill. It is not required if HCP or QCP drilling head is used • Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81 (1) Seat size code For inserts, see pages: ICP (18) • ICP-2M (24) • ICK (28) • ICK-2M (32) • ICM (36) • ICN (42) • QCP-2M (43) • HCP-IQ (47) • FCP (52) • ICG (57) 11