Каталог Iscar отрезка 2022 - страница 21

PARTING DGAD, HGAD 1.4N/2N/3N CUTDIA DGAD 4N/5N/6N CUTDIA DGAD/HGAD Parting and Grooving Adapters for HF OAH HF OAH DO-GRIP Double-Ended Inserts OAL CWN-CWX OAL WB CWN-CWX WB WB_2 Designation CWN(2) CWX(3) WB WB_2 OAH HF OAL CUTDIA DGAD 1.4N 1.40 1.40 1.00 3.2 30.0 24.0 41.50 28.0 EDG 23B* DGAD 2N 1.90 (4) 2.50 1.60 3.2 30.0 24.0 41.50 32.0 EDG 33A* DGAD 3N (1) 3.00 (4) 3.18 2.40 4.0 30.0 24.0 41.50 32.0 EDG 33A* HGAD 3N 3.00 3.00 2.40 4.0 30.0 24.0 50.50 50.0 EDG 23B* DGAD 4N 4.00 4.00 3.20 - 30.0 24.0 50.50 50.0 EDG 33A* DGAD 5N 4.80 5.00 4.00 - 30.0 24.0 50.50 50.0 EDG 33A* DGAD 6N 6.00 6.35 5.20 - 30.0 24.0 50.50 50.0 EDG 33A* • DG..1.0 insert can be mounted into pocket sizes 2 and 3 in which case the pocket width has to be modified - see page 479 • For user guide, see pages 538-547 (1) Only the DGN/R/L inserts are suitable for this adapter (2) Minimum cutting width (3) Maximum cutting width (4) For 1 mm inserts, modify adapter * Optional, should be ordered separately For inserts, see pages: DGN-P (487) • DGN-UT/UA (487) • DGN-W (482) • DGN-WP (488) • DGN-Z (486) • DGN/DGNC/DGNM-C (481) • DGN/DGNM-J/JS/JT (483) • DGR-P (488) • DGR-WP (488) • DGR-Z/ZS (486) • DGR/L-C DGRC/LC-C (482) • DGR/L-J/JS (484) • GRIP (269) • GRIP (full radius) (270) • HGN-C (489) • HGN-J (489) • HGN-UT (490) • HGR/L-C (489) • HGR/L-J/JS (490) For holders, see pages: MAHPR/L-JHP (281) • MAHR/L-JHP (279) • MAHR/L (279) • MAHPR/L (280) • C#-MAHD (624) • C#-MAHPD (625) • C#-MAHDR-45 (623) • C#-MAHDOR (624) • HSK A63WH-MAHUR/L (632) • HSK A63WH-MAHDR-45 (631) • HSK A63WH-MAHDOR (631) • IM-MAHD (633) • IM-MAHPD (633) • C#-MAHD-JHP (624) • C#-MAHPD-JHP (625) • MAHR/L-JHP-MC (280) • HMSN-New Britain (478) • DGHAL-DECO (478) Depth Capacity for DGN/R-1002J Insert on Standard Holders T Depth: T D max Depth: T D max Up to 1.2 No limit Up to 2.2 32.3 Dmax 1.3 830 2.3 29.3 1.4 218 2.4 26.7 1.5 126 2.5 24.8 Cutting Edge 1.6 88.4 2.6 23.2 1.7 68.2 2.7 21.7 0.6 3.3 1.8 55.6 2.8 20.5 Standard Holders Modification 1.9 46.9 2.9 19.4 To achieve no limitation on the workpiece diameter up to 3 mm depth, the steel 2.0 40.7 3.0 18.4 support under the insert should be ground, as per the shown sketch. 2.1 36.0 CUTDIA DGAD-B-D Parting and Grooving Screw- HF OAH Clamped Adapters for DO-GRIP Double-Ended Inserts OAL CWN-CWX WB WB_2 Designation CWN(2) CWX(3) WB WB_2 OAL CUTDIA HF OAH DGAD 1.4B-D16 1.40 1.40 1.00 3.2 36.80 16.0 24.0 30.3 DGAD 1.5B-D20 (1) 1.00 1.50 1.00 3.2 41.00 20.0 24.0 30.3 DGAD 2B-D20 1.90 2.50 1.60 3.2 41.00 20.0 24.0 30.3 • Up to 3 mm depth, without any limitation on the diameter • DG..1.0 insert can also be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified-see page 479 • For user guide, see pages 538-547 (1) Do not use DG.. 1.4 on this tool! (2) Minimum cutting width (3) Maximum cutting width For inserts, see pages: DGN-LF/LFT (485) • DGN-P (487) • DGN-UT/UA (487) • DGN-WP (488) • DGN-Z (486) • DGN/DGNC/DGNM-C (481) • DGN/DGNM-J/JS/JT (483) • DGR-P (488) • DGR-WP (488) • DGR-Z/ZS (486) • DGR/L-C DGRC/LC-C (482) • DGR/L-J/JS (484) For holders, see pages: C#-MAHD-JHP (624) • C#-MAHPD-JHP (625) • MAHR/L-JHP-MC (280) • MAHPR/L-JHP (281) • MAHR/L-JHP (279) • MAHR/L (279) • MAHPR/L (280) • C#-MAHD (624) • C#-MAHPD (625) • C#-MAHDR-45 (623) • C#-MAHDOR (624) • HSK A63WH-MAHUR/L (632) • HSK A63WH-MAHDR-45 (631) • HSK A63WH-MAHDOR (631) • IM-MAHD (633) • IM-MAHPD (633) • HMSN-New Britain (478) • DGHAL-DECO (478) 479