Каталог Iscar обработка канавок 2022 - страница 58

GROOVE-TURN OAL PCHR/L-24 HBHCWN-CWXf2 Grooving, Parting and 0.50-3.20 2.0 HF H Recessing Holders Carrying 3.21-4.23 2.5 HBL Inserts with 5 Cutting Edges 4.24-5.20 3.05.21-6.203.5 CDX 6.21-8.20 4.5 WF f1 B WF=f1+f2 f2 CWN-CWX Right-hand shown Designation H HF B CWN(2) CWX(3) f1 CDX(4) OAL LH HBH PCHR/L 10-24 10.0 10.0 10.0 0.50 3.20 6.5 6.50 120.00 19.5 6.0 PCHR/L 12-24 12.0 12.0 12.0 0.50 3.20 8.5 6.50 120.00 19.5 4.0 PCHR/L 16-24 16.0 16.0 16.0 0.50 3.20 12.5 6.50 120.00 19.5 - PCHR/L 20-24 20.0 20.0 20.0 0.50 3.20 16.5 6.50 120.00 19.5 - PCHR/L 25-24 25.0 25.0 25.0 0.50 3.20 21.5 6.50 135.00 19.5 - PCHR/L 16-24-5 16.0 16.0 16.0 3.21 5.20 11.5 6.40 120.00 21.5 4.0 PCHR/L 20-24-5 20.0 20.0 20.0 3.21 5.20 15.5 6.40 120.00 21.5 - PCHR/L 25-24-5 25.0 25.0 25.0 3.21 5.20 20.5 6.40 135.00 21.5 - PCHR/L 25-24-8 (1) 25.0 25.0 25.0 5.21 8.20 18.5 6.50 135.00 19.5 - • WF=f1+f2 (according to insert width (CW) being used) (1) Used with special inserts only (2) Minimum cutting width (3) Maximum cutting width (4) For specific information, refer to insert data For inserts, see pages: PENTA 24-BSPT (674) • PENTA 24-ISO (657) • PENTA 24-MT (646) • PENTA 24-NPT (670) • PENTA 24-UN (664) • PENTA 24-W (668) • PENTA 24-WT (641) • PENTA 24N-C (320) • PENTA 24N-C (full radius) (321) • PENTA 24N-J (319) • PENTA 24N-J (full radius) (320) • PENTA 24N-PF (full radius) (322) • PENTA 24N-PF/P (321) • PENTA 24N-Z (322) • PENTA 24R-C (531) • PENTA 24R-P (534) • PENTA 24R/L-J (530) • PENTA 24R/L-Z (533) Spare Parts Designation PCHL 10-24 SR 16-212-01397L PCHR 10-24 SR 16-212-01397 PCHL 12-24 SR 16-212-01397L PCHR 12-24 SR 16-212-01397 PCHL 16-24 SR 16-212-01397L PCHR 16-24 SR 16-212-01397 PCHL 20-24 SR 16-212-01397L PCHR 20-24 SR 16-212-01397 PCHL 25-24 SR 16-212-01397L PCHR 25-24 SR 16-212-01397 PCHR/L 16-24-5 SR PCHR/L-8-06642 T-15/5 PCHR/L 20-24-5 SR PCHR/L-8-06642 T-15/5 PCHR/L 25-24-5 SR PCHR/L-8-06642 T-15/5 PCHR/L 25-24-8 SR PCHR/L-8-06642 T-15/5 312 ISCAR