Каталог Iscar обработка канавок 2022 - страница 39

IC830 IC8250 IC808 IC908 IC20 IC20N IC5010IC830 IC428IC8250 IC806 IC807IC20 IC804 GROOVE-TURN ±0.025 GIP-E Precision Double-Ended Insertsfor Grooving and Turning 7° 15.3 Ref. 5 CW RE BW Dimensions Tough 1  Hard Recommended Machining Data ap f turn f groove Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) (mm) (mm/rev) (mm/rev) GIP 3.00E-0.00 3.00 0.00 0.02 0.030 2.40 13.00 • 0.00-1.80 0.12-0.16 0.07-0.11 GIP 3.00E-0.20 3.00 0.20 0.02 0.030 2.40 13.00 • • • • • • • • 0.25-1.80 0.15-0.20 0.08-0.13 GIP 3.00E-0.40 3.00 0.40 0.02 0.030 2.40 13.00 • • • • • • • • • • 0.50-1.80 0.17-0.22 0.08-0.14 GIP 3.00E-0.80 3.00 0.80 0.02 0.050 2.40 13.00 • 1.00-1.80 0.19-0.26 0.08-0.15 GIP 4.00E-0.40 4.00 0.40 0.02 0.030 3.20 13.00 • • • • • • • • • • • 0.50-2.40 0.19-0.26 0.10-0.18 GIP 4.00E-0.60 4.00 0.60 0.02 0.050 3.20 13.00 • • • • • • • 0.75-2.40 0.21-0.28 0.10-0.19 GIP 4.00E-0.80 4.00 0.80 0.02 0.050 3.20 13.00 • • • • • • • • • 1.00-2.40 0.22-0.31 0.10-0.20 GIP 4.78E-0.55 4.78 0.55 0.02 0.050 4.00 13.00 • • • • • • 0.70-2.80 0.21-0.31 0.12-0.20 GIP 5.00E-0.40 5.00 0.40 0.02 0.030 4.00 13.00 • • • • • 0.50-3.00 0.22-0.33 0.13-0.21 GIP 5.00E-0.60 5.00 0.60 0.02 0.050 4.00 13.00 • • • • • 0.75-3.00 0.23-0.35 0.13-0.22 GIP 5.00E-0.80 5.00 0.80 0.02 0.050 4.00 13.00 • • • • • • 1.00-3.00 0.24-0.39 0.13-0.23 GIP 5.55E-0.55 5.55 0.55 0.02 0.050 4.80 13.00 • 0.70-3.30 0.21-0.36 0.14-0.23 GIP 6.00E-0.80 6.00 0.80 0.02 0.050 4.80 13.00 • • • • • 1.00-3.60 0.26-0.46 0.15-0.27 GIP 6.00E-1.20 6.00 1.20 0.02 0.050 4.80 13.00 • • 1.45-3.60 0.26-0.51 0.15-0.27 GIP 6.35E-0.80 6.35 0.80 0.02 0.050 4.80 13.00 • • • • 1.00-3.80 0.27-0.49 0.16-0.29 • DMIN for internal machining = 70 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436 (1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) (3) Cutting depth maximum For tools, see pages: Anti-Vibration Blades (284) • C#-GHDR/L (274) • CGHN 26-M (356) • CGHN 32-DGM (358) • CGHN 32-M (357) • CGHN-D (283) • CGHN-DG (283) • CGHN-S (282) • CGPAD (281) • CGPAD-JHP (282) • GHDR/L (short pocket) (275) • GHDR/L-JHP (short pocket) (276) • GHDR/L-JHP-MC (short pocket) (277) • GHGR/L (278) • GHMPR/L (273) • GHMR/L (273) • GHSR/L (373) • GHSR/L-JHP-SL (374) • NQCH-GHSR/L-JHP (374) GDPY ±0.025 30 Ref. Precision Double-EndedInserts for External Heavy- 7° 6.4 Duty Grooving and Turning CW RE BW Dimensions Tough 1  Hard Recommended Machining Data ap f turn f groove Designation CW RE CWTOL(1) RETOL(2) BW (mm) (mm/rev) (mm/rev) GDPY 10.00-0.80 10.00 0.80 0.02 0.050 8.00 • • • 1.00-6.00 0.35-0.65 0.22-0.40 GDPY 10.00-1.20 10.00 1.20 0.02 0.050 8.00 • 1.45-6.00 0.45-0.80 0.22-0.40 GDPY 10.00-2.00 10.00 2.00 0.02 0.050 8.00 • • 2.40-6.00 0.35-0.78 0.22-0.40 GDPY 11.00-1.20 11.00 1.20 0.02 0.050 8.00 • 1.45-6.60 0.39-0.73 0.24-0.41 GDPY 11.00-2.00 11.00 2.00 0.02 0.050 8.00 • 2.40-6.60 0.39-0.79 0.24-0.41 • For cutting speed recommendations and user guide, see pages 419-428, 432-436 (1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) For tools, see pages: CGHN-8-10D (287) • GADR/L-JHP (287) • GHDR/L (long pocket) (285) 293