Каталог Iscar обработка канавок 2022 - страница 22

GROOVE-TURN LH GHDR/L-JHP (short pocket) Grooving and Turning Tools HF H with Channels for High-Pressure 20 mm shank tools G 1/8"-28 typx2 WB Coolant (3 inlet ports) CDX OAL Bar Max WF CWN-CWX B Right-hand shown Designation CWN(2) CWX(3) H CDX(4) B OAL LH WF WB HF GHDR/L 20-3-JHP 2.80 4.00 20.0 9.00 20.0 120.00 29.0 18.80 2.40 20.0 GHDR/L 25-3-JHP 2.80 4.00 25.0 9.00 25.0 140.00 44.0 23.80 2.40 25.0 GHDR/L 20-4-JHP 4.00 5.00 20.0 10.00 20.0 120.00 29.0 18.40 3.20 20.0 GHDR/L 25-4-JHP 4.00 5.00 25.0 10.00 25.0 140.00 45.0 23.40 3.20 25.0 GHDR/L 25-5-JHP 5.00 6.40 25.0 12.00 25.0 140.00 46.0 22.90 4.20 25.0 GHDR/L 25-P8-JHP (1) 7.00 10.00 25.0 16.50 25.0 150.00 50.0 21.80 6.50 25.0 • For using TIP and GPV inserts, toolholder seat needs to be modified according to insert profile to ensure clearance • For user guide and accessories see pages 419-436 (1) Used with GIMF, GIMY, GIPY, GIMM, GITM, GPV, GIMY-F, GIMM 8CC,GIMT,GIMN,GITM (full radius), GIMY (full radius) inserts. (2) Minimum cutting width (3) Maximum cutting width (4) Cutting depth maximum For inserts, see pages: GIA-K (W=3-6) (298) • GIF (297) • GIF (full radius) (298) • GIF-E (W=4-6 full radius) (294) • GIF-E (W=4-6) (292) • GIM-C (521) • GIM-J (522) • GIM-J-RA/LA (522) • GIM-UT (524) • GIM-UT-RA/LA (524) • GIM-W (523) • GIM-W-RA/LA (523) • GIMF (288) • GIMM 8CC (583) • GIMN (289) • GIMT (287) • GIMY (288) • GIMY (full radius) (290) • GIMY-F (291) • GIP (297) • GIP (full radius) (296) • GIP-E (293) • GIP-E (full radius) (294) • GIP-UN (303) • GIPA (full radius W=3-6) (301) • GIPA (W=3-6) (300) • GIPM-A46 / GIP-1250 (375) • GIPY (300) • GITM (299) • GITM (full radius) (299) • GPV (304) • TIP-MT (647) • TIP-P-BSPT (674) • TIP-P-BSW (668) • TIP-P-ISO (658) • TIP-P-NPT (671) • TIP-P-UN (664) • TIP-WT (641) Flow Rate vs. Pressure GHDR...-JHP 70 Bar 100 Bar 140 Bar Hose G 1/8”-28 Adaptation Nipple Flow Rate Flow Rate Flow Rate Designation (liters/min) (liters/min) (liters/min) GHDR/L 20-3-JHP 5-7 7-9 9-11 GHDR/L 20-4-JHP 6-8 10-12 12-14 GHDR/L 25-3-JHP 6-8 8-10 10-12 GHDR/L 25-4-JHP 10-12 14-16 16-18 GHDR/L 25-5-JHP 13-16 19-21 22-24 Copper Seal Washer 1/8” PLUG G 1/8”-28Key: HW 5.0 Spare Parts Designation GHDR/L 20-3-JHP SR M5X16 DIN912 HW 4.0(a) PLG G1/8 TL360 HW 5.0 GHDR/L 25-3-JHP SR M5X20DIN912 HW 4.0(a) PLG 1/8ISO1179 HW 5.0 GHDR/L 20-4-JHP SR M6X16 DIN912 PLG G1/8 TL360 HW 5.0 GHDR/L 25-4-JHP SR M6X20 DIN912 PLG 1/8ISO1179 HW 5.0 GHDR/L 25-5-JHP SR M6X20 DIN912 PLG 1/8ISO1179 HW 5.0 GHDR/L 25-P8-JHP SR M6X20 DIN912 PLG 1/8ISO1179 HW 5.0 (a) For optional key with limited tightening torque see page 428 276 ISCAR