Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 24

ENDMILLS • SOLID CARBIDE • MULTI-MASTER Rd° HM390 ETP-10 90° Endmills Carrying HM390 DC DCONMS TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges APMX LH OAL Designation DC APMX CICT(1) OAL LH DCONMS Shank(2) RMPX°(3) kg HM390 ETP D25-2-C25-10 25.00 8.00 2 120.00 25.0 25.00 C 2.9 0.38 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D25-2-W25-10 25.00 8.00 2 95.00 25.0 25.00 W 2.9 0.30 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D25-3-C24-10-B 25.00 8.00 3 200.00 25.0 24.00 C 2.9 0.60 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D25-3-C25-10 25.00 8.00 3 120.00 25.0 25.00 C 2.9 0.38 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D25-3-C25-10-B 25.00 8.00 3 200.00 40.0 25.00 C 2.9 0.66 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D25-3-W25-10 25.00 8.00 3 95.00 25.0 25.00 W 2.9 0.30 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D25-4-C25-10 25.00 8.00 4 120.00 25.0 25.00 C 2.9 0.38 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D28-3-C25-10 28.00 8.00 3 120.00 25.0 25.00 C 2.5 0.40 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D28-3-C25-10-B 28.00 8.00 3 200.00 25.0 25.00 C 2.5 0.67 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D32-3-C31-10-B 32.00 8.00 3 250.00 30.0 31.00 C 2.1 1.33 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D32-3-C32-10 32.00 8.00 3 130.00 30.0 32.00 C 2.1 0.71 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D32-3-W32-10 32.00 8.00 3 110.00 30.0 32.00 W 2.1 0.58 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D32-4-C32-10 32.00 8.00 4 130.00 30.0 32.00 C 2.1 0.70 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D32-4-C32-10-B 32.00 8.00 4 200.00 40.0 32.00 C 2.1 1.11 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D32-4-W32-10 32.00 8.00 4 110.00 30.0 32.00 W 2.1 0.58 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D40-5-C32-10 40.00 8.00 5 130.00 30.0 32.00 C 1.6 0.76 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D40-5-W32-10 40.00 8.00 5 110.00 30.0 32.00 W 1.6 0.64 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D50-6-C32-10 50.00 8.00 6 130.00 38.0 32.00 C 1.2 0.86 SR 14-562/S BLD T10/S7 SW6-SD • For user guide see pages 542-548 (1) Number of inserts (2) C-Cylindrical, W-Weldon (3) Maximum ramping angle For inserts, see pages: HM390 TPKT/CT 1003 (447) DRVS Rd° HM390 ETP-M 90° Endmills with a FLEXFIT DC THSZMS DCONMS Threaded Adaptation Carrying HM90 TPKT 1003... Inserts with 3 Helical Cutting Edges APMX LF OAL Designation DC APMX CICT(1) LF DCONMS THSZMS OAL DRVS(2) RMPX°(3) TQ_3(4) kg HM390 ETP D25-3-M12 25.00 8.00 3 35.00 21.00 M12 57.00 18.0 2.9 33 0.08 SR 14-562/S BLD T10/S7 SW6-SD HM390 ETP D32-4-M16 32.00 8.00 4 35.00 29.00 M16 60.00 25.0 2.1 40 0.16 SR 14-562/S BLD T10/S7 SW6-SD • For adaptation see page 44 • For user guide see pages 542-548 • When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter (1) Number of inserts (2) Clamping wrench size (3) Maximum ramping angle (4) Tool tightening torque Nxm (lbfxin) For inserts, see pages: HM390 TPKT/CT 1003 (447) For holders, see pages: BT-ODP (FLEXFIT) (314) • C#-ODP (FLEXFIT) (314) • CAB M-M (FLEXFIT) (312) • DIN69871-ODP (315) • ER-ODP (315) • HSK A-ODP (FLEXFIT) (316) • S M (312) • S M-C-H (312) • S M-CF (313) 22 ISCAR