Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 22

ENDMILLS • SOLID CARBIDE • MULTI-MASTER DRVS DC THSZMS DCONMS Rd° T490 ELN-MM-08 90° Endmills with a MULTI-MASTER Threaded APMX LF Adaptation Carrying OAL Tangentially Clamped Inserts Designation DC CICT(1) APMX DCONMS LF OAL THSZMS DRVS(2) RMPX°(3) RMPX°_2(4) kg T490 ELN D16-2-MMT10 16.00 2 8.00 14.70 20.00 32.00 T10 13.0 2.0 1.1 0.03 SR 10502813-HGSM IP-7/51 T490 ELN D20-2-MMT12 20.00 2 8.00 18.70 21.50 35.00 T12 16.0 1.7 0.8 0.05 SR 10502813-HG-M IP-7/51 T490 ELN D20-3-MMT12 20.00 3 8.00 18.70 21.50 35.00 T12 16.0 1.7 0.8 0.05 SR 10502813-HG-M IP-7/51 • Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation see page 44 • For user guide see pages 542-548 (1) Number of inserts (2) Clamping wrench size (3) Maximum ramping angle - valid only with T490 LNHT 080404PNR-RD inserts (4) Maximum ramping angle - valid only with T490 LNMT 080404PNR-RD inserts For inserts, see pages: T490 LNAR-P (480) • T490 LNMT/LNHT 0804 (476) For holders, see pages: MM S-A (stepped shanks) (84) • MM S-A (straight shanks) (87) • MM S-A-C# (86) • MM S-A-HSK (609) • MM S-A-N (85) • MM S-A-SK (90) • MM S-B (85° conical shanks) (87) • MM S-D (89° conical shanks) (88) • MM S-ER (89) • MM S-ER-H (89) • MM TS-A (86) H490 E90AX-09 90° Endmills Carrying H490 DC DCONMS ANKX 09... Double-Sided Rectangular Inserts with 4 APMX Helical Cutting Edges LU OAL Designation DC CICT(1) APMX OAL LU DCONMS Shank(2) kg H490 E90AX D16-2-C15-09-B 16.00 2 8.00 150.00 40.0 15.00 C 0.18 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D16-2-C16-09 16.00 2 8.00 90.00 26.0 16.00 C 0.12 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D16-2-W16-09 16.00 2 8.00 85.00 26.0 16.00 W 0.11 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D18-2-C16-09 18.00 2 8.00 90.00 25.0 16.00 C 0.12 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D20-2-C19-09-B 20.00 2 8.00 160.00 40.0 19.00 C 0.31 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D20-2-C20-09 20.00 2 8.00 110.00 26.0 20.00 C 0.23 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D20-2-W20-09 20.00 2 8.00 90.00 26.0 20.00 W 0.18 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D20-3-C20-09 20.00 3 8.00 110.00 26.0 20.00 C 0.23 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D20-3-W20-09 20.00 3 8.00 90.00 26.0 20.00 W 0.18 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D22-3-C20-09 22.00 3 8.00 115.00 25.0 20.00 C 0.25 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D25-3-C24-09-B 25.00 3 8.00 200.00 40.0 24.00 C 0.61 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D25-3-C25-09 25.00 3 8.00 120.00 26.0 25.00 C 0.39 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D25-3-W25-09 25.00 3 8.00 95.00 26.0 25.00 W 0.30 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D25-4-C25-09 25.00 4 8.00 120.00 26.0 25.00 C 0.39 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D25-4-W25-09 25.00 4 8.00 95.00 26.0 25.00 W 0.30 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D32-4-W32-09 32.00 4 8.00 110.00 30.0 32.00 W 0.60 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D32-5-C32-09 32.00 5 8.00 130.00 30.0 32.00 C 0.72 SR 10508082-HG SW4-SD BLD T08/M7 H490 E90AX D32-5-W32-09 32.00 5 8.00 110.00 30.0 32.00 W 0.60 SR 10508082-HG SW4-SD BLD T08/M7 • For user guide see pages 542-548 • "B" Suffix cylindrical shank which may be shortened (1) Number of inserts (2) C-Cylindrical, W-Weldon For inserts, see pages: H490 ANKX 0904-FF (470) • H490 ANKX/ANCX-09 (469) DRVS H490 E90AX-M 90° Endmills with a FLEXFIT Threaded Connection Carrying DC THSZMS DCONMS H490 ANKX/ANCX 09... Double-Sided Rectangular Inserts APMX LF Designation DC CICT(1) APMX LF DHUB THSZMS DRVS(2) TQ_3(3) kg H490 E90AX D20-3-M10-09 20.00 3 8.00 30.00 18.70 M10 16.0 29 0.06 SR 10508082-HG BLD T08/M7 SW4-SD H490 E90AX D25-4-M12-09 25.00 4 8.00 28.00 21.00 M12 17.0 33 0.07 SR 10508082-HG BLD T08/M7 SW4-SD H490 E90AX D32-5-M16-09 32.00 5 8.00 30.00 29.00 M16 25.0 40 0.16 SR 10508082-HG BLD T08/M7 SW4-SD • For adaptation see page 44 • For user guide see pages 542-548 • When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter (1) Number of inserts (2) Clamping wrench size (3) Tool tightening torque Nxm (lbfxin) For inserts, see pages: H490 ANKX 0904-FF (470) • H490 ANKX/ANCX-09 (469) For holders, see pages: BT-ODP (FLEXFIT) (314) • C#-ODP (FLEXFIT) (314) • CAB M-M (FLEXFIT) (312) • DIN69871-ODP (315) • ER-ODP (315) • HSK A-ODP (FLEXFIT) (316) • S M (312) • S M-C-H (312) • S M-CF (313) 20 ISCAR