Каталог Iscar инструментальная оснастка 2022 - страница 45

DIN 69893 HSK A / E BD_2 LSCWS A 0.003 A 58-60 HRc HSK A-HYDRO (long) ADJRGA Long Projection HydraulicChucks with HSK DIN69893 DCONMS BTED BD G2.5THIDDCONWSHSK A50, 63= 25,000RPMHSK A80, 100= 18,000RPM Form A Tapered Shanks U<1.0 gmm LB LBX LPR . Designation DCONMS DCONWS BTED BD BD_2 LPR LBX LB ADJRGA LSCWS THID CDI(1) kg HSK A63 HYDRO 6X150 63.00 6.00 23.00 26.00 50.00 150.00 124.0 103.00 10.00 37.0 M5 1 1.36 HSK A63 HYDRO 6X200 63.00 6.00 23.00 26.00 50.00 200.00 174.0 153.00 10.00 37.0 M5 1 1.57 HSK A63 HYDRO 8X150 63.00 8.00 25.00 28.00 50.00 150.00 124.0 104.00 10.00 37.0 M6 1 1.41 HSK A63 HYDRO 8X200 63.00 8.00 25.00 28.00 50.00 200.00 174.0 154.00 10.00 37.0 M6 1 1.68 HSK A63 HYDRO 10X150 63.00 10.00 27.00 30.00 50.00 150.00 124.0 104.00 10.00 42.0 M8X1 1 1.45 HSK A63 HYDRO 10X200 63.00 10.00 27.00 30.00 50.00 200.00 174.0 154.00 10.00 42.0 M8X1 1 1.74 HSK A63 HYDRO 12X150 63.00 12.00 29.00 32.00 50.00 150.00 124.0 105.00 10.00 47.0 M10X1 1 1.49 HSK A63 HYDRO 12X200 63.00 12.00 29.00 32.00 50.00 200.00 174.0 155.00 10.00 47.0 M10X1 1 1.83 HSK A63 HYDRO 14X150 63.00 14.00 30.00 34.00 50.00 150.00 124.0 105.00 10.00 47.0 M10X1 1 1.58 HSK A63 HYDRO 14X200 63.00 14.00 30.00 34.00 50.00 200.00 174.0 155.00 10.00 47.0 M10X1 1 1.95 HSK A63 HYDRO 16X150 63.00 16.00 34.00 38.00 50.00 150.00 124.0 106.50 10.00 52.0 M12X1 1 1.74 HSK A63 HYDRO 16X200 63.00 16.00 34.00 38.00 50.00 200.00 174.0 156.50 10.00 52.0 M12X1 1 2.17 HSK A63 HYDRO 18X150 63.00 18.00 36.00 40.00 50.00 150.00 124.0 107.00 10.00 52.0 M12X1 1 1.81 HSK A63 HYDRO 18X200 63.00 18.00 36.00 40.00 50.00 200.00 174.0 157.00 10.00 52.0 M12X1 1 2.30 HSK A63 HYDRO 20X150 63.00 20.00 38.00 42.00 50.00 150.00 124.0 108.00 10.00 52.0 M12X1 1 1.89 HSK A63 HYDRO 20X200 63.00 20.00 38.00 42.00 50.00 200.00 174.0 158.00 10.00 52.0 M12X1 1 2.44 HSK A63 HYDRO 25X150 63.00 25.00 46.00 50.00 50.00 150.00 124.0 - 10.00 58.0 M16X1 1 2.56 HSK A63 HYDRO 25X200 63.00 25.00 46.00 50.00 50.00 200.00 174.0 - 10.00 58.0 M16X1 1 3.05 HSK A100 HYDRO 6X150 100.00 6.00 23.00 26.00 50.00 150.00 121.0 100.00 10.00 37.0 M5 1 3.00 HSK A100 HYDRO 6X200 100.00 6.00 23.00 26.00 63.00 200.00 171.0 144.00 10.00 37.0 M5 1 3.29 HSK A100 HYDRO 8X150 100.00 8.00 25.00 28.00 63.00 150.00 121.0 94.50 10.00 37.0 M6 1 3.07 HSK A100 HYDRO 8X200 100.00 8.00 25.00 28.00 63.00 200.00 171.0 144.50 10.00 37.0 M6 1 3.29 HSK A100 HYDRO 10X150 100.00 10.00 27.00 30.00 63.00 150.00 121.0 95.00 10.00 42.0 M8X1 1 3.11 HSK A100 HYDRO 10X200 100.00 10.00 27.00 30.00 50.00 200.00 171.0 151.00 10.00 42.0 M8X1 1 3.27 HSK A100 HYDRO 12X150 100.00 12.00 29.00 32.00 63.00 150.00 121.0 95.50 10.00 47.0 M10X1 1 3.15 HSK A100 HYDRO 12X200 100.00 12.00 29.00 32.00 63.00 200.00 171.0 145.50 10.00 47.0 M10X1 1 3.46 HSK A100 HYDRO 14X150 100.00 14.00 30.00 34.00 50.00 150.00 121.0 97.00 10.00 47.0 M10X1 1 3.05 HSK A100 HYDRO 14X200 100.00 14.00 30.00 34.00 50.00 200.00 171.0 147.00 10.00 47.0 M10X1 1 3.56 HSK A100 HYDRO 16X150 100.00 16.00 38.00 38.00 63.00 150.00 121.0 97.50 10.00 52.0 M12X1 1 3.15 HSK A100 HYDRO 16X200 100.00 16.00 38.00 38.00 63.00 200.00 171.0 147.50 10.00 52.0 M12X1 1 3.73 HSK A100 HYDRO 18X150 100.00 18.00 36.00 40.00 50.00 150.00 121.0 107.00 10.00 52.0 M12X1 1 3.25 HSK A100 HYDRO 18X200 100.00 18.00 36.00 40.00 63.00 200.00 171.0 148.00 10.00 52.0 M12X1 1 3.86 HSK A100 HYDRO 20X150 100.00 20.00 38.00 42.00 63.00 150.00 121.0 99.00 10.00 52.0 M12X1 1 3.46 HSK A100 HYDRO 20X200 100.00 20.00 38.00 42.00 63.00 200.00 171.0 149.00 10.00 52.0 M12X1 1 4.01 HSK A100 HYDRO 25X150 100.00 25.00 46.00 50.00 50.00 150.00 121.0 - 10.00 58.0 M16X1 1 3.65 HSK A100 HYDRO 25X200 100.00 25.00 46.00 50.00 63.00 200.00 171.0 136.00 10.00 58.0 M16X1 1 4.67 HSK A100 HYDRO 32X200 100.00 32.00 56.00 60.00 60.00 200.00 171.0 - 10.00 62.0 M16X1 1 5.36 • Chucking forces will be reduced by 25% if reduction sleeves are used. • A cooling tube must be used with coolant through HSK spindles (ordered separately). • Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (must be ordered separately). • Clamping wrench (wrench HYDRO HEX4) and test bar should be ordered separately.(1) 1 - Hole for data chip, 0 - Without hole for data chip 699 562 593