Каталог Iscar инструментальная оснастка 2022 - страница 159

SPINJET COOLENT DRIVEN HSM SPINDLES ER11 DCONXWS TJS HPC C# DCONMS BD_4 BD BD_2 BD_3 70 Bar Max High-Pressure Coolant Driven HSM Spindle with CAMFIX Shank LBLB_2 for Small Diameter Cutting Tools LB_3 LB_4 LBX OAL LPR For ER-SPR collets use "AA" type only Designation BD BD_2 BD_3 BD_4 LB LB_2 LB_3 LB_4 LBX LPR OAL DCONMS DCONXWS(1) RPMN(2) RPMX(3) CDI(4) kg TJS HPC C6 16.00 71.25 80.00 81.00 17.00 24.58 37.50 79.10 114.30 124.30 159.00 63.00 7.00 25000 45000 0 2.00 • Coolant pressure 15-70 bar and flow rate 10-22 l/min • RPM range 20,000-45,000 RPM • The spindle provides only external strong coolant jet around the tool • Battery not supplied • For user guide, see pages 701-703 (1) Maximum diameter (2) Minimum RPM (3) Maximum RPM (4) 1 - Hole for data chip, 0 - Without hole for data chip Spare Parts Designation TJS HPC C# NUT ER11 GHS WRENCH ER11 SMS TJS TSD DISPLAY* HW 2.0 TJS SHAFT LOCK KEY COOLING TUBE C6* * Optional, should be ordered separately ER11 DCONXWS DCONMS BD BD_2 BD_3 70 BD_4 Bar Max TJS HPC ST LB High-Pressure Coolant Driven LB_2 HSM Spindle with Straight Shank LB_3LB_4 for Small Diameter Cutting Tools LBXOAL LPR For ER-SPR collets use "AA" type only Designation BD BD_2 BD_3 BD_4 LB LB_2 LB_3 LB_4 LBX LPR OAL DCONMS DCONXWS(1) RPMN(2) RPMX(3) CDI(4) kg TJS HPC ST20 16.00 71.25 80.00 81.00 17.00 24.58 37.50 79.10 105.30 111.84 155.00 20.00 7.00 25000 45000 0 1.50 • Coolant pressure 15-70 bar and flow rate 10-22 l/min • RPM range 20,000-45,000 RPM • The spindle provides only external strong coolant jet around the tool • Battery not supplied • For user guide, see pages 701-703 (1) Maximum diameter (2) Minimum RPM (3) Maximum RPM (4) 1 - Hole for data chip, 0 - Without hole for data chip Spare Parts Designation TJS HPC ST NUT ER11 GHS WRENCH ER11 SMS TJS TSD DISPLAY* HW 2.0 TJS SHAFT LOCK KEY * Optional, should be ordered separately 130.0 29.0 TJS TSD DISPLAY RPM Speed Display for SPINJET High Speed Spindles 80.0 707