Каталог Iscar инструментальная оснастка 2022 - страница 128

TAPPING & REAMING DEVICES 58-60 HRc GTI ER-ST (tapping) LS OHN LB CSI DCONNWSDCONXWS DIN 6499 ER Tapping Attachments with Straight Shanks DCONMS BD Flb Flf BD_2 Flb Flf Tap Tap Designation DCONMS CSI min max DCONNWS(2) DCONXWS(3) BD BD_2 LB OHN(4) LS Flf Flb CDI(5) kg GTI ER11 ST16X150 M (1) 16.00 ER11 M2 M7 0.5 7.0 16.00 - 19.0 - 150.00 6.0 3.0 0 0.00 GTI ER16 ST20X80 20.00 ER16 M3 M10 0.5 10.0 28.00 29.50 24.6 41.60 80.00 8.0 3.0 0 0.00 GTI ER20 ST20X80 20.00 ER20 M4 M14 1.0 13.0 34.00 33.50 28.0 49.00 80.00 8.0 3.0 0 0.35 GTI ER25 ST25X80 25.00 ER25 M5 M16 1.0 16.0 42.00 40.50 32.0 53.00 80.00 9.0 4.0 0 0.55 GTI ER32 ST25X80 25.00 ER32 M6 M20 1.0 16.0 50.00 56.50 32.0 77.20 80.00 9.0 4.0 0 1.16 GTI ER40 ST32X80 32.00 ER40 M6 M27 2.0 20.0 63.00 56.50 51.0 95.20 80.00 9.0 4.0 0 1.66 (1) Without a clamping flat (2) Minimum diameter (3) Maximum diameter (4) Minimum overhang • (1) Use 4 mm hex key for screw adjustment. • A cooling tube must be used with all coolant through HSK spindles (should be ordered separately) 684-688 715 678 Spare Parts Designation GTI ER11 ST16X150 M NUT ER11 MINI GTI ER16 ST20X80 NUT ER16 TOP WRENCH ER16* GTI ER20 ST20X80 NUT ER20 TOP WRENCH ER20* GTI ER25 ST25X80 NUT ER25 TOP WRENCH ER25* GTI ER32 ST25X80 NUT ER32 TOP WRENCH ER32* GTI ER40 ST32X80 NUT ER40 TOP WRENCH ER40* * Optional, should be ordered separately OAL GFIS ER-ERFloating Reamer ER Collet LPR LB CSI 80SS Bar MaxDCONNWS Chuck with ER Shank for High DCONXWS Speed Cutting Reamers BD BD BD_2 Designation CSI DCONNWS(1) DCONXWS(2) OAL LPR LB BD BD_2 SS RFl(3) kg GFIS ER32X70-ER32 32 12.00 20.00 133.00 87.00 29.50 50.00 68.00 ER32 0.22 1.69 • Maximum 10K RPM • Angular floating range 1.0° • For Reaming 12-20 mm shank diameter range only (1) Minimum diameter (2) Maximum diameter (3) Radial floating range 684-688 714 715 Spare Parts Designation GFIS ER-ER NUT ER32 TOP PRESET ER-JET 12X1.75 SR M4X4 DIN913 676 ISCAR