Каталог Iscar инструментальная оснастка 2022 - страница 126

CENTER ALIGNMENT DEVICES +0.2+0.4 0 90 +0.4 0 +0.2 +0.2 L 0 -0.2 +0.2 L0 -0.2 L -0.2M0+0.2+0.2 USER GUIDE Operation on a Milling Machine On a milling machine, the drill’s nominal diameter can be Recommended Feed When changed by shifting the drill’s axis out of the tool spindle. Using Eccenter Sleeves Adapter RecommendedFeed Rate 100% 90% 80% MILL 70% +0.4 0 60% DR-Drill 50% Eccenter Sleeve 40% M 2xD 3xD 4xD 5xD Radial adjustment pin (not supplied) Length to Dia. Ratio The adjustment markings should be located perpendicular DC+0.4 mm to the flat on the circumference of the DR flange. To facilitate the rotation of the sleeve, a metal rod or a screw key may be inserted into a +0.4 hole on the eccentric sleeve flange. Unlock 0 +0.2 adapter screw before adjusting sleeve. DC DC-0.2 mm M DC-0.2 DC+0.4 To enlarge the diameter, turn the sleeve clockwise. Operation on a Milling Machine +0.2 0+0.2-0.2 M L +0.4 -0.2 M L 0 +0.2 Hole Diameter Hole Diameter Hole Diameter 29.8 mm 30 mm 30.4 mm Drill Diameter = 30 mm 674 ISCAR