Каталог Iscar дисковые фрезы и фрезерные пластины 2022 - страница 28

SLOTTING & SLITTING CUTTERS USER GUIDE Single or Double-Face Milling Configuration Guide Configuration Guide for FDN/SDN/SSB/FST/FSB... CALN15 Cutters Half Side Tools Number of Bottom Flatness Bottom Flatness Axial Depth of Designation Cutting Edges(1) ap≤7 H (mm) ap=14 H (mm) Application Cut ap (mm) LNKX 1506... 4R+4L Flat 0.65 Double Face MIlling Stock=0-14 LNMT 1506... 4R+4L Flat 0.65 Stock=0-14 LNAT 1506... 4R+4L Flat 0.4-0.65 ap Stock=0-14(2)ap LNHT 1506...-N(3) 2R+2L Flat Flat Stock=0-14 LNKX 1506... 4R Flat 0.65 Half Side Milling Stock=0-14 LNMT 1506... 4R Flat 0.65 Stock=0-14 LNAT 1506... 4R Flat 0.4-0.65 ap Stock=0-14(2) LNHT 1506...-R(4) 4R Flat Flat Stock=0-14(2) LNKX 1506... 4L Flat 0.65 Half Side Milling Stock=0-14 LNMT 1506... 4L Flat 0.65 Stock=0-14 LNAT 1506... 4L Flat 0.4-0.65 ap Stock=0-14(2) LNHT 1506...-N(3) 4L Flat Flat Stock=0-14(2) (1) Use of 8 cutting edges (4R+4L) is possible only when ap≤7 mm, otherwise 4 cutting edges (2R+2L) can be used. (2) Max ap for radius inserts LNAT 150616..=12.80 LNAT 150625..=12.25 LNAT 150632..=11.60 ap-7 LNAT 150640..=14.00 7 ap Configuration Guide for Full Slot FDN/SDN... CALN15 Cutters Insert Half Side Tools Number of Bottom Slot Radius Axial Depth of Designation Cutting Edges Flatness H (mm) R (mm) Application Cut W (mm) LNKX 1506... 2R+2L 0.65 0.8 W=18.9-25.6 LNMT 1506... 2R+2L 0.65 0.8 W=18.9-25.6 LNAT 150616PN-N-HM 2R+2L 0.55 1.6 W=18.9-25.6 LNAT 150625PN-N-NM 2R+2L 0.45 2.5 W W=18.9-24.5 LNAT 150632PN-N-NM 2R+2L 0.40 3.2 W=18.9-23.2 LNAT 150640PN-N-NM 2R+2L 0.65 4.0 W=18.9-25.6 LNHT 1506...-N(3) 2R+2L Flat 0.8 W=18.9-25.6 R WÊ-Ê15.0 H W LNHT 1506...-N LNKX 1506... LNHT 1506...-R R.H./L.H LNMT 1506... R.H. only R.H./L.H. Page 487 Pages 486-488 Page 487 344 ISCAR