Каталог Iscar державки и пластины для нарезания резьбы 2022 - страница 9

IC528IC228IC908 THREADING PNA RE GIQR/L-WTInternal Inserts with Whitworth PDPTWFL Partial Profile for Threading in 8 mm and Larger Holes Left-hand shown NUT Dimensions 55° SCREW Designation L RE PNA PDPT(1) WF DMIN TPIN(2) TPIX(3) GIQR/L 8-WT-0.05 7.78 0.05 55.0 1.50 4.80 8.00 16.00 50.00 • GIQR/L 11-WT-0.05 10.68 0.05 55.0 2.00 6.70 11.00 11.00 50.00 • • Can be used for thread milling by circular interpolation • TPI min D/5.9 • D-diameter of thread (pitch max<=W) • For cutting speed recommendations, see page 711 (1) Cutting depth maximum (3) Threads per inch maximum (3) Threads per inch maximum For tools, see pages: MG (414) • MGCH (414) OAL X DCONMS PDX PICCO-55°-Thread OHN 55° Inserts for 55° Internal PDX Threading Profile a WF HC x CF Right-hand shown NUT Dimensions 55° SCREW Designation DCONMS TPIX(1) TPIN(2) HC CF PDX WF a OHN(3) OAL DMIN PICCO R 005.5548-15 5.00 48.00 24.00 0.40 0.06 0.5 1.90 4.40 15.0 30.00 4.80 • PICCO R 006.5548-15 6.00 48.00 24.00 0.40 0.06 0.5 2.30 5.30 15.0 30.00 6.00 • PICCO R 006.5524-15 6.00 24.00 16.00 0.81 0.12 0.8 2.30 5.30 15.0 30.00 6.00 • PICCO R 007.5524-15 7.00 24.00 16.00 0.81 0.12 0.8 2.80 6.30 15.0 30.00 7.00 • • All mini-bars have sharp corners • For detailed cutting data, see page 711 (1) Threads per inch maximum (2) Threads per inch minimum (3) Minimum overhang For holders, see pages: GHPCOR (361) • PICCO ACE (359) • PICCO/MG PCO (holder) (360) OAL DMIN PICCO-55°-N A A (55° Threading)Inserts with Internal Coolant WF DCONMS a 55˚ Channel for 55° Internal LU PDX CF HC Threading Profile NUT Dimensions 55° SCREW Designation DCONMS TPIX(1) TPIN(2) HC CF PDX WF a LU OAL DMIN PICCO R 006.5524-15N 6.05 24.00 16.00 0.81 0.12 0.8 2.30 5.30 14.0 36.00 6.00 • PICCO R 007.5524-15N 7.05 24.00 16.00 0.81 0.12 0.8 2.80 6.30 14.0 36.00 7.00 • • All mini-bars have sharp corners • Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only • For detailed cutting data, see page 711 (1) Threads per inch maximum (2) Threads per inch minimum For holders, see pages: PICCO ACE-N (710) • PICCO-N (holder) (710) 643