DGFHR/L Parting and Grooving Reinforced Blades for DO-GRIP Inserts W Dmax 15° DGFHR-26... h1 B1 l1 A A2 Designation B 1 W min (1) W max A 2 A l 1 h 1 D max (2) Machines Insert DGFHR 26T16-2 26.0 1.90 2.50 8.0 1.70 110.00 21.4 42.0 TNS-30 DG. 1.../DG. 2.. DGFHR/L 26T23-2 26.0 1.90 2.50 8.0 1.60 110.00 21.4 42.0 TNS-30/112 DG. 1.../DG. 2.. DGFHR/L 26T16-3 26.0 3.00 3.18 8.0 2.40 110.00 21.4 30.0 TNS-30 DG. 1.../DG. 3.. DGFHR/L 26T23-3 26.0 3.00 3.18 8.0 2.40 110.00 21.4 42.0 TNS-30/42 DG. 1.../DG. 3.. • Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user. • DG..1.0 insert can be mounted into pocket sizes 2 and 3. In that case the pocket width has to be modified (1) For DG: 1.0 insert - modify holder. (2) The specified limit refers to the tool. For inserts, see pages: DGN-LF/LFT (A66) • DGN-P (A68) • DGN-UT/UA (A68) • DGN-WP (A69) • DGN-Z (A67) • DGN/DGNC/DGNM-C (A64) • DGN/DGNM-J/ JS/JT (A65) • DGR-P (A69) • DGR-WP (A70) • DGR-Z/ZS (A67) • DGR/L-C DGRC/LC-C (A64) • DGR/L-J/JS (A66). For holders, see pages: • SGTBU/SGTBN (A88) . Spare Parts Designation Extractor DGFHR/L 26T EDG 23A* * (Optional, should be ordered separately) DGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping Tmax-r DGFHL-B-D50R DGFHR-B-D50L Dmax W H2 B1 h1 Dmax h4 A 36.7 DGFHL-B-D50 DGFHR-B-D50 A2 l1 Designation B 1 (3) W min (4) W max A A 2 l 1 H 2 h 1 h 4 T max-r D max (5) Insert DGFHR/L 26B-2D50 (1) 26.0 1.90 2.50 1.60 8.0 110.00 33.7 21.4 3.6 18.00 42.0 DG. 1.../DG. 2.. DGFHL 26B-2D50R (2) 26.0 1.90 2.50 1.60 8.0 110.00 31.5 21.4 3.7 18.00 50.0 DG. 1.../DG. 2.. DGFHR 26B-2D50L (2) 26.0 1.90 2.50 1.60 8.0 110.00 31.5 21.4 3.7 18.00 50.0 DG. 1.../DG. 2.. DGFHR/L 26B-3D50 (1) 26.0 3.00 3.18 2.40 8.0 110.00 31.5 21.4 3.7 18.00 30.0 DG. 1.../DG. 3.. DGFHL 26B-3D50R (2) 26.0 3.00 3.18 2.40 8.0 110.00 31.5 21.4 3.7 18.00 50.0 DG. 1.../DG. 3.. DGFHR 26B-3D50L (2) 26.0 3.00 3.18 2.40 8.0 110.00 31.5 21.4 3.7 18.00 50.0 DG. 1.../DG. 3.. • Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user. • DG..1.0 insert can be mounted into pocket sizes 2 and 3. In that case the pocket width has to be modified (1) For Traub machines, model TNC 30, TNM 28, TNS 26/30/42/112, TNA 300, TNK 260. (2) For Tornos Bechler, Emco 2000/20, 2000/26 machines. (3) Mounted on all ISCAR standard blocks. (4) For DG: 1.0 insert - modify holder. (5) The specified limit refers to the tool. For inserts, see pages: DGN-LF/LFT (A66) • DGN-P (A68) • DGN-UT/UA (A68) • DGN-WP (A69) • DGN-Z (A67) • DGN/DGNC/DGNM-C (A64) • DGN/DGNM-J/ JS/JT (A65) • DGR-Z/ZS (A67) • DGR/L-C DGRC/LC-C (A64). For holders, see pages: • SGTBU/SGTBN (A88) . Spare Parts Designation Screw Key DGFHR/L-B-D.. (R/L) SR M4X20DIN912 12.9 HW 3.0 A47 Заказ инструмента: http://steelcam.org 8 (343) 382-52-03 | sales@sverla-ekb.ru