Общий каталог Ingersoll 2011 - страница 411

• 0003 Table of Contents
• 0006 End Mills
• 0064 Long Edge
• 0104 0Deg Face Mills
• 0160 Face Mills
• 0202 Slotters
• 0218 Form Mills
• 0236 Profile Mills
• 0302 Milling Tech
• 0384 Solid Carbide
• 0448 Solid Carbide Tech
• 0474 Holemaking & Thread Milling
• 0666 Holemaking & Thread Milling Tech
• 0720 Innofit Top On Toolholders
• 0738 HSK Toolholders
• 0774 CAT Toolholders
• 0796 BT Toolholders
• 0816 Adaptions Accessories
• 0872 Turning Inserts
• 1024 Turning Holders
• 1144 Turning Tech
• 1174 Threading Inserts
• 1242 Threading Holders
• 1256 Threading Tech
• 1268 T-Clamp
• 1344 T-Clamp Tech
• 1376 T-CAP
• 1388 T-CAP Tech
• 1394 Product_Index

FRONT/BACK CHAMFER, V-FORM TIP - 18T CHAMFER .062” x 45˚ Chamfering Slotting T-Slotting Counter-Sink C A T1 D1 (+0) (-.002) W (±.001) GRADES P M K N S H(K)(M)(P/K) IN1030 + + + + o + Good o Bad D1 Max. Radial T1 Driver Size/ Cutter # Nominal Depth Thread A W C Torque Value Number Effective Diameter of Cut Size Width Width Corner (in lbs.) 18T-6216T6RN06 6 .625 .13 T06 .030 .156 .062 x 45˚ 1/60 Operating guidelines on page 410. HARDWARE Driver Size Torx Driver Optional Torque Bit 1 DS-T20T DS-T20B When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase. 413