Каталог Ingersoll новинки 2021 - страница 10

END MILLS & SHELL MILLS WITH INTERLOCKING INSERTS FOR SMOOTH AND RELIABLE OPERATION • Overlapping “V-Notch” inserts that allow for smooth chip formation at high feed-rates • The patented end-station fully supports the insert for reliable operation and unobstructed chip evacuation • Tangentially mounted inserts with dovetailed seating for greater cutter reliability and insert stability • End-station inserts with corner radii from .031” to .250” and that fit the same cutter body, no cutter modifications needed • High axial shear for smooth chip formation in both keen and landed insert geometries SERIES 2XJ3J 90° SHELL MILL Facing Shoulder Channel Coolant OAL DC DCON WEP KWW 90°KAPR APMX WEP - See insert drawing for wiper options. Part Number DC APMX OALCuttingDepth of CutOverallDia.Max.LengthZEFFZEFPZNF ZNP NOFEffectiveEff. TeethFace InsertPeripheralFluteTeethPeripheryCountInsert CountCountDCONKWWBore Dia.Keyway 2XJ3J-20023D1R01 2.000 1.512 2.35 4 4 4 8 4 0.750 0.312 2XJ3J-20027D1R01 2.000 1.971 2.75 4 4 4 12 4 0.750 0.312 2XJ3J-20027D1R02 2.000 1.512 2.75 3 3 3 6 3 0.750 0.312 2XJ3J-20030D1R01 2.000 2.430 3.00 4 4 4 16 4 0.750 0.312 2XJ3J-20035D1R01 2.000 2.889 3.50 4 4 4 20 4 0.750 0.312 2XJ3J-25035D3R02 2.500 2.886 3.50 4 4 4 20 4 1.000 0.375 2XJ3J-25030D3R01 2.500 2.431 3.00 5 5 5 20 5 1.000 0.375 2XJ3J-25035D3R01 2.500 2.886 3.50 5 5 5 25 5 1.000 0.375 2XJ3J-25035D3R02 2.500 2.886 3.50 4 4 4 20 4 1.000 0.375 2XJ3J-25040D3R01 2.500 3.348 4.00 5 5 5 30 5 1.000 0.375 2XJ3J-25045D3R01 2.500 3.806 4.50 5 5 5 35 5 1.000 0.375 2XJ3J-30037D4R01 3.000 2.890 3.75 5 5 5 25 5 1.250 0.500 2XJ3J-30037D4R02 3.000 2.890 3.75 6 6 6 30 6 1.250 0.500 2XJ3J-30042D4R01 3.000 3.348 4.25 5 5 5 30 5 1.250 0.500 2XJ3J-30050D4R01 3.000 3.807 5.00 5 5 5 35 5 1.250 0.500 2XJ3J-30050D4R02 3.000 3.807 5.00 6 6 6 42 6 1.250 0.500 * End station insert screw tightening torque: 40-45 in*lb. Side station insert screw tightening torque: 30-35 in*lb. ** Total number of inserts = ZNF + ZNP. 10