Общее описание ULTRAMINI Обработка отверстий от Ø 0.2 мм general instruction grooving, boring and profiling starting at Ø 0.2 mm более 1000 видов пластин доступны со склада в Германии over 1000 different inserts are available on stock • быстрая и легкая замена пластин • quick and easy changing of inserts • максимальная точность при • maximum repeating accu- последующих зажимах по длине и racy of the length and диаметру diameter setting • беспроблемная последующая привязка • easy and correct compliance по высоте центра with peak heights Тип 687 type 687 для пластин Ø 8 mm + Ø 7 mm for inserts Ø 8 mm + Ø 7 mm Тип 660, 670, 680 type 660, 670, 680 для пластин Ø 6 mm, Ø 7 mm for inserts Ø 6 mm, Ø 7 mm + Ø 8 mm + Ø 8 mm Тип K type K специально для пластин special for insert Тип 520 и Тип B type 520 and type B Тип UM type UM от 10.0 mm from 10.0 mm Тип UHCM Type UHCM от 12.0 mm from 12.0 mm Тип UM.18 / UM.28 Type UM.18 / UM.28 от 10.0 mm from 10.0 mm 17 1-33-UM.indd 19 12.03.2014 11:06:19 Заказ инструмента: http://steelcam.org 8 (343) 382-52-03 | sales@sverla-ekb.ru