ULTRAMINI Übersicht Bohrungsbearbeitung ab Ø 0.2 mm grooving, boring and profiling summary starting at Ø 0.2 mm Schneideinsätze inserts Maße Seite Ausdrehen und Kopieren boring and profiling dimensions page Typ 050 Ausdrehen und Kopieren boring and profiling D min. 0.2 - 9.8 ... 42 Superfinish Typ F050 Ausdrehen fürperfekte Oberflächen boring forperfect surface quality D min. 4.0 - 6.8 ... 47 Typ 050.20 Ausdrehen und Kopierenmit Geometrie 20° / 20°boring and profilingwith geometry 20° / 20°D min. 2.0 - 5.0... 48 Typ 053 Ausdrehen und Kopierenmit Eckenradius 0.03 mmboring and profilingwith corner radius 0.03 mmD min. 2.8 - 4.0... 49 Typ 055 Ausdrehen und Kopierenmit Eckenradius 0.05 mmboring and profilingwith cornerradius 0.05 mmD min. 2.0 - 6.0... 50 Typ 050....B Ausdrehen und Kopieren boring and profilingmit innerer Kühlmittelzufuhrwith through coolantD min. 6.0 - 6.8... 52 Typ 050....C Ausdrehen und Kopieren boring and profilingmit Spantreppewith chipbreakerD min. 2.0 - 6.8... 53 für bessere Spankontrolle for better chipcontrol Ausdrehen und Kopieren boring and profiling Mediline Typ M050 mit innerer Kühlmittelzufuhr with through coolant D min. 0.5 - 4.0 ... 55 und modifizierter Geometrie and modified profile Ausdrehen und Kopieren boring and profiling Xtraline Typ X050 mit innerer Kühlmittelzufuhr, with through coolant, chipbreaker D min. 1.0 - 7.0 ... 57 Spantreppe, extra stabile Ausführung and extra solid construction Hardline Typ 050 Ausdrehen und Kopieren,Hartbearbeitung bis 66 HRCboring and profiling,hard machining up to 66 HRCD min. 2.0 - 6.8... 62 Typ 050..../CBN Ausdrehen und Kopieren,für Hartbearbeitungboring and profiling,for hard machiningD min. 2.8 - 6.8 ... 64 Typ 047 Ausdrehen und Kopieren boring and profilingmit Geometrie 47° / 8°with geometry 47° / 8°D min. 2.0 - 6.0... 65 Typ 090 Ausdrehen und Kopierenmit Geometrie 20° / 90°boring and profilingwith geometry 20° / 90°D min. 2.8 - 6.0... 66 4