Общий каталог Dijet 2018 - страница 54
Навигация
Общий каталог Dijet 2012 на русском
Tooling by DIJET
Modular Head Series
QM MAX MQXTYPE
■ RECOMMENDED CUTTING CONDITIONS/ HIGH SPEED MACHINING
● MQX type (EPHW type insert) + MSN Carbide Shank Holder
Tool dia. (mm)
Work Insert 25/26
Materials Grades No. of teeth 4N No. of teeth 5N
ℓ ap ae n Vf ℓ ap ae n Vf
(mm) (mm) (mm) (min-1) (mm/min) (mm) (mm) (mm) (min-1) (mm/min)
Hardened die steel ~100 0.30 ~18 1,150 3,680 ~100 0.30 ~18 1,150 4,600
SKD61, DAC, DHA JC8118
(1.2344, 1.2379) 150 0.25 ~18 1,040 2,660 150 0.25 ~18 1,040 3,330
42-52HRC 200 0.25 ~18 920 1,770 200 0.20 ~18 920 2,210
Hardened die steel ~100 0.20 ~18 1,020 1,220 ~100 0.20 ~18 1,020 1,530
SKD11, SLD, DC11 DH102
(1.2344, 1.2379) 150 0.15 ~18 920 990 150 0.15 ~18 920 1,240
55-62HRC 200 0.10 ~18 820 790 200 0.10 ~18 820 980
Tool dia. (mm)
Work Insert
30/32/35 32/35
Materials Grades No.of teeth 5N No.of teeth 6N
ℓ ap ae n Vf ℓ ap ae n Vf
(mm) (mm) (mm) (min-1) (mm/min) (mm) (mm) (mm) (min-1) (mm/min)
Hardened die steel ~130 0.30 ~24 900 3,600 ~130 0.30 ~24 900 4,320
SKD61, DAC, DHA JC8118
(1.2344, 1.2379) 190 0.25 ~24 810 2,590 100 0.25 ~24 810 3,110
42-52HRC 250 0.20 ~24 720 1,730 250 0.20 ~24 720 2,070
Hardened die steel ~130 0.20 ~24 800 1,200 ~130 0.20 ~24 800 1,440
SKD11, SLD, DC11 DH102
(1.2344, 1.2379) 190 0.15 ~24 720 970 190 0.15 ~24 720 1,160
55-62HRC 250 0.10 ~24 640 770 250 0.10 ~24 640 920
ℓ: Overhung length, ap: Axial depth of cut, ae: Radial depth of cut, n: Spindle speed, Vf: Feed speed
■ NOTE
1) The cutting parameters to be adjusted according to the machine rigidity or work rigidity.
2) In case chatter occurrs, recommend to reduce depth of cut or spindle speed with keeping feed per tooth.
3) If machine does not have enough power, recommend to reduce depth of cut first and reduce spindle speed and
feed speed.
B038 4) Use air blow to flush the chips out.
Modular Head Series
QM MAX MQXTYPE
■ RECOMMENDED CUTTING CONDITIONS/ HIGH SPEED MACHINING
● MQX type (EPHW type insert) + MSN Carbide Shank Holder
Tool dia. (mm)
Work Insert 25/26
Materials Grades No. of teeth 4N No. of teeth 5N
ℓ ap ae n Vf ℓ ap ae n Vf
(mm) (mm) (mm) (min-1) (mm/min) (mm) (mm) (mm) (min-1) (mm/min)
Hardened die steel ~100 0.30 ~18 1,150 3,680 ~100 0.30 ~18 1,150 4,600
SKD61, DAC, DHA JC8118
(1.2344, 1.2379) 150 0.25 ~18 1,040 2,660 150 0.25 ~18 1,040 3,330
42-52HRC 200 0.25 ~18 920 1,770 200 0.20 ~18 920 2,210
Hardened die steel ~100 0.20 ~18 1,020 1,220 ~100 0.20 ~18 1,020 1,530
SKD11, SLD, DC11 DH102
(1.2344, 1.2379) 150 0.15 ~18 920 990 150 0.15 ~18 920 1,240
55-62HRC 200 0.10 ~18 820 790 200 0.10 ~18 820 980
Tool dia. (mm)
Work Insert
30/32/35 32/35
Materials Grades No.of teeth 5N No.of teeth 6N
ℓ ap ae n Vf ℓ ap ae n Vf
(mm) (mm) (mm) (min-1) (mm/min) (mm) (mm) (mm) (min-1) (mm/min)
Hardened die steel ~130 0.30 ~24 900 3,600 ~130 0.30 ~24 900 4,320
SKD61, DAC, DHA JC8118
(1.2344, 1.2379) 190 0.25 ~24 810 2,590 100 0.25 ~24 810 3,110
42-52HRC 250 0.20 ~24 720 1,730 250 0.20 ~24 720 2,070
Hardened die steel ~130 0.20 ~24 800 1,200 ~130 0.20 ~24 800 1,440
SKD11, SLD, DC11 DH102
(1.2344, 1.2379) 190 0.15 ~24 720 970 190 0.15 ~24 720 1,160
55-62HRC 250 0.10 ~24 640 770 250 0.10 ~24 640 920
ℓ: Overhung length, ap: Axial depth of cut, ae: Radial depth of cut, n: Spindle speed, Vf: Feed speed
■ NOTE
1) The cutting parameters to be adjusted according to the machine rigidity or work rigidity.
2) In case chatter occurrs, recommend to reduce depth of cut or spindle speed with keeping feed per tooth.
3) If machine does not have enough power, recommend to reduce depth of cut first and reduce spindle speed and
feed speed.
B038 4) Use air blow to flush the chips out.