Общий каталог Dijet 2018 - страница 39

Modular Head Series Tooling by DIJET SKS G II MSGTYPE Features 4 3 insert grades “JC8118”, “JC8050” &“JC7550” can be widely applied from JC 8118For mold steel more than general & mold steel to hard-to-cut ma- 38HRC &high hardened die terials such as high hardened die steel, steel less than 50HRC. titanium alloy & stainless steel JC 8050 For general & mold steel less than 36HRC. JC 7550 For titanium alloy & stainless steel. Application ISO P M K S H P01 P10 P20 P30 P40 M01 M10 M20 M30 M40 K01 K10 K20 K30 S01 S10 S20 S30 H01 H10 H20 JC8118 JC8118 JC8118 Applicable range JC8050 JC7550 JC7550 Features 5 Large chip pocket achieved excellent chip removal. SKS-GII achieved 3.2 times longer 0.8 tool life compared with Tool life 0,7 competitor M, 1.8 times longercompared with competitor U, and comparison 0,6 Competitor M Competitor U SKS-G II 1.2 times longer compared withconventional tool. 0,5 conventional 0,4 Tool (32HRC) Material: P20 0,3 Oø 63mm Tool dia. 0,2 Insert No.●SKS-GII (Dijet)SPNW100415ZTR (JC8118) Competitor M OC utting conditions 0,1 ▲ Competitor U Vc=150m/min, fz=1mm/t, ● Conventional (3 corner) ap=1.5mm, ae=37.5mm, 0 Air blow, 0 10 20 30 40 50 60 70 80 90 Down cut, Test by one insert (m) Cutting length VB=0,5 (mm) criterion of tool life B023 VB (mm) flank wear (mm)